Technical information on cylindrical roller bearings

Single row cylindrical roller bearings with cage

Single row cylindrical roller bearings with cage are suitable where:

  • Bearing arrangements are subjected to very high radial loads
  • Not only high radial forces but also axial loads from one or both directions must be supported by the bearing position (semi-locating or locating bearing function)
  • Bearing arrangements must have very high rigidity
  • Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing (in the case of bearings with a non-locating or semi-locating bearing function)
  • High radial loads and very high speeds occur but the very high radial load carrying capacity of full complement cylindrical roller bearings is not required
  • The bearings should be separable (one bearing ring can be removed for easier mounting)

Cylindrical roller bearing with cage/full complement bearing, comparison of speed and load carrying capacity

nG =  limiting speed

Cr =  basic dynamic load rating

SL1923 =  full complement cylindrical roller bearing

NJ23 =  cylindrical roller bearing with cage


Want to find out more about our Single row cylindrical roller bearings with cage?

You will find detailed technical information in our knowledge center:

Cylindrical roller bearings with disc cage or with spacers

Cylindrical roller bearings with disc cage/with spacers are suitable where:

  • Bearing arrangements are subjected to very high radial loads and higher speeds occur ➤ section, ➤ section
  • High dynamic inertia forces are present
  • Not only high radial forces but also axial loads from one direction must be supported by the bearing position (semi-locating bearing function) ➤ section
  • High shock loads occur
  • Thermally stable conditions are required in the bearing even at higher speeds
  • The cages are subjected to high dynamic inertia forces; e. g. in vibratory machinery
  • Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing
  • The bearings should be separable for easier mounting; in vibratory machinery, for example, the bearing ring with circumferential load as well as the ring with point load should have a tight fit ➤ section, ➤ section

Cylindrical roller bearing with full complement bearing/standard cage/disc cage, comparison of speed and load carrying capacity

nG =  limiting speed

Cr =  basic dynamic load rating

SL1923 =  full complement cylindrical roller bearing

NJ23 =  cylindrical roller bearing with standard cage

LSL1923 =  cylindrical roller bearing with disc cage


Want to find out more about our Cylindrical roller bearings with disc cage/with spacers?

You will find detailed technical information in our knowledge center:


Single row full complement cylindrical roller bearings

Single row full complement cylindrical roller bearings are suitable where:

  • Bearing arrangements are subjected to particularly high radial loads ➤ section
  • Not only very high radial forces but also high axial loads from one direction must be supported by the bearing position (semi‑locating bearing function) ➤ section
  • Bearing arrangements operating under the conditions described above must have very high rigidity
  • Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing ➤ section
  • Very high radial loads occur at lower speeds, i. e. the bearings do not need to achieve speeds as high as those of cylindrical roller bearings with cage ➤ section and ➤ link
  • Particularly space-saving designs are required despite very high load
  • The bearings should be separable (not self-retaining) for easier mounting ➤ section

Cylindrical roller bearing with cage/full complement bearing, comparison of speed and load carrying capacity

Cr =  basic dynamic load rating

nG =  limiting speed


Want to find out more about our Single row full complement cylindrical roller bearings?

You will find detailed technical information in our knowledge center:


Double row full complement cylindrical roller bearings

Double row full complement cylindrical roller bearings are suitable where:

  • Bearing arrangements are subjected to particularly high radial loads ➤ section
  • Not only particularly high radial forces but also axial loads from one or both directions must be supported by the bearing position (semi-locating or locating bearing function)➤ section
  • Bearing arrangements must have very high rigidity
  • Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing (in the case of bearings with a non-locating or semi-locating bearing function) ➤ section
  • Very high radial loads occur at lower speeds, i. e., the bearings do not need to achieve speeds as high as those of cylindrical roller bearings with cage ➤ section and ➤ link
  • Space-saving designs are required despite very high load
  • The bearings should be separable for easier mounting (bearings with non-locating bearing function) ➤ section and ➤ section

Cylindrical roller bearing with cage/single row full complement bearing, double row full complement bearing, comparison of speed and load carrying capacity

Cr =  basic dynamic load rating

nG =  limiting speed


Want to find out more about our Double row full complement cylindrical roller bearings?

You will find detailed technical information in our knowledge center:

    联系我们 声明 数据保护
    Cookie政策 使用条款 更改国家

舍弗勒大中华区

 

上海市嘉定区安亭镇安拓路1号
邮编:201804

© Schaeffler Greater China