选择其他国家或地区以查看您所在位置的内容。
美国
04:33:02 GMT+0000 (Coordinated Universal Time)
产品信息
公制
英制
n.r.
F | Spindle nut design |
主要尺寸和性能数据
| L | 365 mm | Length of Carriage |
| H | 145 mm | Total Height |
| B2 | 260 mm | Total Width |
安装尺寸
| B1 | 250 mm | Width of Carriage |
| b87 | 90 mm | |
| d85 | 19 mm | Tolerance h6 |
| d86 | 75 mm | Tolerance h7 |
| G87 | M8 | Thread |
| h13 | 25 mm | |
| h14 | 50 mm | |
| h85 | 75 mm | |
| h87 | 70 mm | |
| JB43 | 35 mm | |
| JB44 | 115 mm | |
| JB45 | 185 mm | |
| jB8 | 50 mm | |
| jB9 | 110 mm | |
| jB10 | 210 mm | |
| L2 max | 5,850 mm | Maximum length of Support Rail |
| L85 | 28 mm | |
| L86 | 9 mm | |
| L88 | 67 mm | |
| NB43 | 14 mm | |
| NB85 | 6 mm | Tolerance P9 |
| NL43 | 20 mm | |
| NL85 | 20 mm | Length of Keyway |
| NT85 | 3.5 mm | Depth of Keyway |
| t87 | 20 mm | Depth of Thread |
尺寸
| B5 | 259 mm | Width of End Plates |
| FBL | 1.18 | Effective length factor of bellow |
| H1 | 35 mm | Height of Carriage |
| H2 | 108 mm | Width of Support Rail |
| H5 | 144 mm | |
| L4 | 33 mm | |
| L5 | 28 mm | |
| L72 | 2 mm | |
| l41 | 30 mm | |
| l42 | 35 mm | |
| S41 | 13 mm |
Technical data
| Rx | 270 mm | |
| Ry | 69.3 mm | |
| Rz | 150 mm | |
| S | 20 mm | Safety Distance |
| mLAW | 12.84 kg | Mass of Carriage |
| vmax | 0.86 m/s | Maximum Speed |
| amax | 20 m/s2 | Maximum Acceleration |
| IC | 100,200 N | Load direction I: compressive load |
| I C0 | 324,000 N | Load direction I: compressive load |
| II C | 68,600 N | Load direction II: tensile load |
| II C0 | 180,000 N | Load direction II: tensile load |
| III C | 73,800 N | Load direction III: lateral load |
| III C0 | 188,000 N | Load direction III: lateral load |
| M0x per | 13,500 Nm | Max. permissible static moment per Carriage 1 |
| M0y per | 16,200 Nm | Max. permissible static moment per Carriage 1 |
| M0z per | 15,500 Nm | Max. permissible static moment per Carriage 1 |
| ly | 7,069 cm4 | Geometrical moments of inertia of Support Rail |
| lz | 899 cm4 | Geometrical moments of inertia of Support Rail |
| Ca MU | 29,700 N | Load capacity spindle nut dyn 2 |
| C0a MU | 59,800 N | Load capacity spindle nut stat 2 |
| Ca L | 27,500 N | Load capacity fixed Spindle bearing dyn |
| C0a L | 55,000 N | Load capacity fixed Spindle bearing stat |
| d0 | 32 mm | Spindle Diameter |
| P | 20 mm | Spindle Pitch |
| ls | 6.43 kg*cm2 | Mass moment of inertia of threaded Spindle |
| 2SPU | ja | Double Spindle Support |
附加信息
ZKLF2575-2RS-PE | Rolling Bearings | |
F | Drive System | |
4x KWSE25-H | Carriage |
脚注
1
The values are single loads and apply when the underside of the actuator is fully supported. If there are several carriage units per actuator or combined loads are present, these must be reduced.
2
Basic load ratings in accordance with DIN 69051. Due to the modified calculation algorithms in DIN 69051, the basic load ratings Ca and C0 may differ in comparison with older data.
下载：
您当前的产品型号
| Size code | 25 | |
| Length of carriage | 365 | 365 mm |
| Drive type | KGT | Ball screw drive |
| Spindle pitch | 20 | 20 mm |
| Additional carriage | / | No additional carriage |
| Spindle support | 2SPU | Double spindle support |
| Attachment to the carriage | N | T-Slots |