选择其他国家或地区以查看您所在位置的内容。
美国
21:09:23 GMT+0000 (Coordinated Universal Time)
产品信息
公制
英制
主要尺寸和性能数据
| B1 | 86 mm | Total Width |
| H | 82 mm | 高度 |
| L | 155 mm | 長度 |
| ≈m | 12.4 kg/m | 重量 |
安装尺寸
| D86 | 70 mm | |
| D87 | 80 mm | Ø Bolt circle |
| d85 | 20 mm | |
| d86 | 61 mm | Ø Inner Fit |
| L88 | 25 mm | |
| G43 | M8 | Thread |
| G87 | M6 | Thread |
| h85 | 41.5 mm | |
| JB43 | 59 mm | |
| JL43 | 100 mm | Tolerance ±0,2 |
| jB8 | 43 mm | |
| NB85 | 6 mm | Width of Keyway |
| NL85 | 16 mm | Length of Keyway |
| NT85 | 3.5 mm | Depth of Keyway |
| T86 | 2.3 mm | Depth Fit |
| Tol T86 up | 0.3 mm | Upper tolerance |
| Tol T86 low | 0 mm | Lower tolerance |
| t43 max | 14 mm | Depth of Thread |
| t87 max | 12 mm |
尺寸
| B2 | 75 mm | Width of Support Rail |
| B4 | 74 mm | Width of Return Unit |
| B18 | 15 mm | |
| B72 | 2 mm | |
| H1 | 32 mm | |
| H2 | 66.5 mm | 高度 |
| H4 | 81.5 mm | Height of Return Unit |
| H7 | 47 mm | |
| H18 | 40 mm | |
| h13 | 25 mm | |
| h18 | 5 mm | |
| L2 max | 24,000 mm | Maximum length of Support Rail |
| L4 | 80 mm | |
| L6 | 6 mm | Length of Wiper Brushes |
| L18 | 300 mm | |
| Lx1 min | 50 mm | Minimum distance between the Carriages |
| LTn min | 500 mm | Support Rail in Segments length min |
| LTn max | 8,000 mm | Support Rail in Segments length max |
| S | 85 mm | Dimension |
Technical data
| mLAW | 0.73 kg | Mass of Carriage |
| m1 | 2.46 kg | Mass of Connecting Plates of Profiles |
| m3 | 0.73 kg | Mass of additional Carriage |
| vmax | 8 m/s | Maximum Speed |
| amax | 40 m/s2 | Maximum Acceleration |
| Rx | 60 mm | |
| Ry | 20.5 mm | |
| Rz | 54 mm | |
| I C | 4,100 N | Load direction I: compressive load |
| I C0 | 2,400 N | Load direction I: compressive load |
| II C | 4,100 N | Load direction II: tensile load |
| II C0 | 2,400 N | Load direction II: tensile load |
| III C | 6,600 N | Load direction III: lateral load |
| III C0 | 4,200 N | Load direction III: lateral load |
| M0x per | 30 Nm | Max. permissible static moment per Carriage 1 |
| M0y per | 130 Nm | Max. permissible static moment per Carriage 1 |
| M0z per | 70 Nm | Max. permissible static moment per Carriage 1 |
| Iy | 104 cm4 | Geometrical moments of inertia of Support Rail 2 |
| Iz | 76 cm4 | Geometrical moments of inertia of Support Rail 2 |
附加信息
18 Nm | Max. permissible drive torque | |
4 x LFR50/8-6-2Z | Track Rollers | |
0.1 mm | Repeat Accurancy ± | |
175 mm | Feed (mm/rotation) | |
20AT5 | Toothed Belt | |
0.068 kg/m | Mass of Toothed Belt | |
640 N | Permissible Toothed Belt operating force | |
2.2 kg*cm2 | Mass moment of inertia of Gears |
温度范围
| Tmin | 0 °C | Minimum operating Temperatur |
| Tmax | 80 °C | Maximum operating Temperatur |
脚注
1
The values are single loads and apply when the underside of the actuator is fully supported. If there are several carriage units per actuator or combined loads are present, these must be reduced.
2
Moment of inertia of area of “closed” support rail (= support rail without free milled area on base). In comparison with these values, the moment of inertia of area Iy of the side with the free milled area on the base is reduced to an insignificant degree and the moment of inertia of area Iz is reduced by approx. 10%.
下载：
您当前的产品型号
| Size code | 32 | |
| Length of carriage | 155 | 155 mm |
| Carriage design | / | Standard carriage |
| Drive type | (3)ZR | Toothed belt drive |
| Additional carriage | W2 | Second, driven carriage |
| Support rail design | FA517.2 | Three-piece |
| Bellow | / | No |