選擇其他國家或地區以查看您所在位置的內容。
美國
10:06:22 GMT+0000 (Coordinated Universal Time)
產品資訊
n.r.
FM | Spindle nut design |
主要尺寸和性能資料
| B4 | 275 mm | Total Width |
| H | 75 mm | Total Height |
| L | 275 mm | Length of Carriage |
安裝尺寸
| b82 | 65 mm | |
| b87 | 80 mm | |
| D8 | 9 mm | |
| d85 | 11 mm | |
| d86 | 60 mm | Tolerance -0,01 |
| G43 | M8x16 | Thread |
| G87 | M6 | Thread |
| h85 | 40 mm | |
| h87 | 33 mm | Tolerance ±0,2 |
| jB43 | 140 mm | |
| jL43 | 70 mm | |
| jB44 | 252 mm | |
| jB8 | 160 mm | |
| jB9 | 250 mm | |
| jL44 | 210 mm | |
| jL8 | 60 mm | 1 |
| L85 | 23 mm | |
| L86 | 8 mm | |
| L88 | 42 mm | |
| S8 | 15 mm | |
| T8 | 11 mm | |
| t43 | 16 mm | Depth of Thread |
| t87 | 15 mm | Depth of Thread |
尺寸
| H1 | 40.5 mm | Height of Carriage |
| H2 | 34 mm | Height of Support Rail |
| H4 | 74.5 mm | Height of Bearing Housing |
| H5 | 74.5 mm | Height of Bearing Housing |
| h82 | 31 mm | |
| L4 | 35 mm | Length of Bearing Housing with Drive System |
| L5 | 25 mm | Length of Bearing Housingwithout Drive System |
Technical data
| Rx | 198 mm | |
| Ry | 35 mm | |
| Rz | 206 mm | |
| S | 5 mm | Safety Distance |
| mLAW | 13.8 kg | Mass of Carriage |
| vmax | 0.29 m/s | Maximum Speed |
| amax | 10 m/s2 | Maximum Acceleration |
| CI | 19,000 N | Load Direction I: Compressive Load |
| C0 I | 58,000 N | Load Direction I: Compressive Load |
| CII | 19,000 N | Load Direction II: Tensile Load |
| C0 II | 58,000 N | Load Direction II: Tensile Load |
| CIII | 19,000 N | Load Direction III: Lateral Load |
| C0 III | 58,000 N | Load Direction III: Lateral Load |
| M0x per | 5,650 Nm | Max. permissible static moment per Carriage 2 |
| M0y per | 4,100 Nm | Max. permissible static moment per Carriage 2 |
| M0z per | 4,100 Nm | Max. permissible static moment per Carriage 2 |
| d0 | 20 mm | Spindle Diameter |
| P | 5 mm | Spindle Pitch |
| C | 10,500 N | Dynamic load rating 3 |
| C0 | 16,600 N | Basic static load capacity 3 |
| Ca | 17,900 N | Load capacity fixed Spindle bearing dyn |
| C0a | 28,000 N | Load capacity fixed Spindle bearing stat |
附加資訊
15 Nm | Max. drive torque for the drive spigot | |
2 x KUVE15-B-H | Carriage | |
ZKLF1560.2RS | Rolling Bearings (locating bearing) | |
0.025 mm | Repeat accuracy ± | |
0.85 kg*cm2 | Mass moment of inertia of threaded Spindle |
溫度範圍
0 °C | Minimum operating Temperatur | |
80 °C | Maximum operating Temperatur |
註腳
1
Location of high precision linear tables: High precision linear tables are supplied as standard with a symmetrical hole pattern. With a symmetrical hole pattern, aL = aR.
2
The values are single loads and apply when the underside of the table is fully supported. These must be reduced for combined loads.
3
Basic load ratings in accordance with DIN 69051. Due to the modified calculation algorithms in DIN 69051, the basic load ratings Ca and C0 may differ in comparison with older data.
下載：
您當前的產品型號
| 尺寸碼 | 15 | |
| Drive System | KGT | Ball screw drive |
| 支架長度 | 275 | 275 mm |
| Spindle diameter | 20 | |
| Spindle pitch | 05 | 5 mm |
| Bellow | 0 | No |